Ga door naar hoofdinhoud

Extracción de la pantalla

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap 6
Screen Removal, Insert an opening pick: stap 0, afbeelding 1 van 3 Screen Removal, Insert an opening pick: stap 0, afbeelding 2 van 3 Screen Removal, Insert an opening pick: stap 0, afbeelding 3 van 3
Insert an opening pick
  • Apply a suction handle to the bottom edge of the phone, while avoiding the very edge of the glass.

  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the frame.

  • Insert an opening pick into the gap under the screen's plastic bezel.

  • The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

Aplica una ventosa en el borde inferior del teléfono, evitando el borde mismo del cristal.

Tira hacia arriba de la ventosa con una presión firme y constante para crear un ligero hueco entre la pantalla y el marco.

Inserta una púa de apertura en el hueco situado bajo el bisel de plástico de la pantalla.

El adhesivo hermético que mantiene la pantalla en su sitio es muy fuerte; crear esta brecha inicial requiere fuerza. Si te resulta difícil abrir un hueco, aplica más calor y mueva suavemente la pantalla hacia arriba y hacia abajo para debilitar el adhesivo hasta que cree un hueco suficiente para introducir la herramienta.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.