Repareer je spullen Gemeenschap Winkel

iMac Intel 27寸 EMC 2546显示屏替换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 44 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Chinees
Vorige stap

Stap 24 vertalen

Stap 24
iMac Intel 27" EMC 2546 Display Replacement: stap 0, afbeelding 1 van 1

  • If you are replacing the display panel, you may need to transfer additional components from the old panel to the new one. Compare the back of the old display with the replacement display. Note all cables, sensors, and foam cushioning that are missing from the new display.

  • If there is a wire or cable underneath adhesive tape, always pull the tape off first.

  • If the cable is glued to the chassis, use a heated iOpener or a hair dryer to soften the adhesive first. You can then slide an opening pick underneath the cable to loosen it. Never pull directly on the delicate connectors.

  • Slide an opening pick underneath the foam cushion pieces to separate them from the display, and gently pull them off. You may need some double sided tape to re-attach them to the new display.

如果您需要替换显示器面板，您可能需要将额外的组件从旧u面板转移到新面板上。比较新旧面板的背部。注意：所有的线缆，传感器和泡沫缓冲材料不随新面板提供。

如果胶带下方有电线或电缆，务必先将胶带移除。

如果电缆粘在底座上，先使用iOpener或吹风机来软化粘合剂。然后您便可以滑一个开口以松动下方的电缆。切勿直接拉动精密连接器。

在此插入翻译

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.