Ga door naar hoofdinhoud

iMac Intel Reemplazo de pantalla de 27 "EMC 2546

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 44 handleidingen die deze stap bevatten.

Stap 24 vertalen

Stap 24
iMac Intel 27" EMC 2546 Display Replacement: stap 0, afbeelding 1 van 1
  • If you are replacing the display panel, you may need to transfer additional components from the old panel to the new one. Compare the back of the old display with the replacement display. Note all cables, sensors, and foam cushioning that are missing from the new display.

  • If there is a wire or cable underneath adhesive tape, always pull the tape off first.

  • If the cable is glued to the chassis, use a heated iOpener or a hair dryer to soften the adhesive first. You can then slide an opening pick underneath the cable to loosen it. Never pull directly on the delicate connectors.

  • Slide an opening pick underneath the foam cushion pieces to separate them from the display, and gently pull them off. You may need some double sided tape to re-attach them to the new display.

Si estás remplazando la pantalla, puede ser que necesites transferir más componentes desde el panel antiguo al nuevo. Compara la parte trasera de la pantalla antigua y la nueva pantalla. Anota qué cables, sensores y cojines de acolchamiento no están presentes en la nueva pantalla.

Si hay un alambre o cable debajo de una cinta adhesiva, siempre separa la cinta primero.

Si el cable está pegado a la estructura, usa un iOpener calentado o un secador de pelo primero para soltar el adhesivo. Entonces podrás introducir una púa de apertura por debajo del cable para aflojarlo. Nunca tires directamente de los conectores delicados.

Desliza una púa de apertura por debajo de los cojines de acolchamiento para separarlos de la pantalla, y tira de ellos con cuidado. Podrías necesitar algo de cinta de doble cara para unirlos a la nueva pantalla.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.