Repareer je spullen Gemeenschap Winkel

iPad Pro 12.9" 5th Gen 로직 보드 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Terug naar de handleiding
Engels
Koreaans
Volgende stap

Stap 1 vertalen

Stap 1
iPad Pro 12.9" 5th Gen Logic Board Replacement, Disconnect the coaxial cables: stap 0, afbeelding 1 van 3 iPad Pro 12.9" 5th Gen Logic Board Replacement, Disconnect the coaxial cables: stap 0, afbeelding 2 van 3 iPad Pro 12.9" 5th Gen Logic Board Replacement, Disconnect the coaxial cables: stap 0, afbeelding 3 van 3
Disconnect the coaxial cables

  • Use the pointed end of a spudger to disconnect the six coaxial cables near the top of the iPad by prying up as close to their connectors as possible.

  • During reassembly, these can be tricky to reconnect. One at a time, hold each connector in place over its socket and press down with the flat end of a spudger. The connector should snap into place.

동축 케이블 연결 해제하기

스퍼저의 뾰족한 끝을 사용하여 iPad 상단 근처의 동축 케이블 6개를 커넥터에 최대한 가까이 들어 올려 연결 해제하세요.

재조립할 떄, 다시 연결하기가 까다로울 수 있습니다. 한 번에 하나씩, 각 커넥터를 소켓 위에 올려놓고 스퍼저의 납작한 끝으로 누르세요. 커넥터가 제자리에 딸깍 소리가 나면서 고정됩니다.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.