Ga door naar hoofdinhoud

Changement carte mère iPad Pro 12,9" (5e génération)

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 1 vertalen

Stap 1
iPad Pro 12.9" 5th Gen Logic Board Replacement, Disconnect the coaxial cables: stap 0, afbeelding 1 van 3 iPad Pro 12.9" 5th Gen Logic Board Replacement, Disconnect the coaxial cables: stap 0, afbeelding 2 van 3 iPad Pro 12.9" 5th Gen Logic Board Replacement, Disconnect the coaxial cables: stap 0, afbeelding 3 van 3
Disconnect the coaxial cables
  • Use the pointed end of a spudger to disconnect the six coaxial cables near the top of the iPad by prying up as close to their connectors as possible.

  • During reassembly, these can be tricky to reconnect. One at a time, hold each connector in place over its socket and press down with the flat end of a spudger. The connector should snap into place.

Utilisez la pointe d'une spatule pour débrancher les six câbles coaxiaux situés en haut de l'iPad en les soulevant au plus près de leurs connecteurs.

Lors du remontage, ces câbles peuvent être difficiles à rebrancher. Maintenez chaque connecteur en place au-dessus de sa prise, l'un après l'autre, et appuyez avec l'extrémité plate d'une spatule (spudger). Le connecteur devrait s'enclencher.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.