Ga door naar hoofdinhoud

iPad Pro 12.9 英寸第五代打开程序

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Stap 4
iPad Pro 12.9" 5th Gen Opening Procedure: stap 0, afbeelding 1 van 2 iPad Pro 12.9" 5th Gen Opening Procedure: stap 0, afbeelding 2 van 2
  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • If your screen isn't getting hot enough, you can use a hair dryer to heat along the right edge of the iPad.

  • For complete instructions on how to use a hair dryer, check out this guide.

  • Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle clockwise half a turn.

  • Don't crank more than a half a turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next step.

等待一分钟,让粘合剂有机会释放并出现开口间隙。

如果屏幕不够热,您可以使用吹风机沿着 iPad 的右边缘加热。

有关如何使用吹风机的完整说明,查看此指南

当反向钳产生足够大的间隙时,在屏幕下方插入三角撬片。

如果反向钳没有产生足够的间隙,则对该区域施加更多的热量,并将手柄顺时针旋转半圈。

每次摇动不要超过半圈,每圈之间要等一分钟。让反向钳和时间为你工作。

跳过下一步。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.