Ga door naar hoofdinhoud

Procedimiento de apertura del iPad Pro 12.9" 5ta Gen

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Stap 21
iPad Pro 12.9" 5th Gen Opening Procedure, Unfasten the upper cable shield: stap 0, afbeelding 1 van 1
Unfasten the upper cable shield
  • Throughout this guide, keep track of each screw and reinstall it exactly where it came from.

  • Use a Phillips screwdriver to remove the two screws securing the upper cable shield:

  • One 1.8 mm-long screw

  • One 1.4 mm-long screw

  • During reassembly, this is a good point to power on your iPad and test all functions before sealing it up. Be sure to power your iPad back down before you continue working.

A lo largo de esta guía, sigue la pista de cada tornillo y vuelve a instalarlo exactamente de donde salió.

Utiliza un destornillador Phillips para quitar los dos tornillos que fijan el escudo superior del cable:

Un tornillo de 1,8 mm de longitud

Un tornillo de 1,4 mm de longitud

Durante el reensamblaje, este es un buen momento para encender tu iPad y probar todas las funciones antes de sellarlo. Asegúrate de volver a apagar tu iPad antes de seguir trabajando.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.