Ga door naar hoofdinhoud

iMac Intel 27インチ EMC 2546 RAMの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
iMac Intel 27" EMC 2546 RAM Replacement, Open the RAM door: stap 0, afbeelding 1 van 2 iMac Intel 27" EMC 2546 RAM Replacement, Open the RAM door: stap 0, afbeelding 2 van 2
Open the RAM door
  • While holding the display steady, use the flat end of a spudger to press in on the RAM door release button, located just above the power port.

  • You may have to press fairly hard—keep at it until the bottom of the door pops out about 0.25" from the rear of the iMac.

ディスプレイをしっかりと固定したまま、スパッジャー(修理用ツール)の平らな先端を使用して、電源ポートのすぐ上にあるRAMドアリリースボタンを押し込みます。

ドアの底面がiMacの後部から約0.5cm飛び出すまで、かなりの力をかけてください。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.