Ga door naar hoofdinhoud

Procédure d'ouverture (1ère et 2ème génération)

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.

Stap 20
Opening Procedure (1st and 2nd Gen): stap 0, afbeelding 1 van 2 Opening Procedure (1st and 2nd Gen): stap 0, afbeelding 2 van 2
  • Lower the opening pick so it is horizontal to the screen.

  • Don't insert the pick more than 5 mm.

  • Continue separating the left edge adhesive until you reach the next indented section of the frame.

Abaissez le médiator afin qu'il soit horizontal par rapport à l'écran.

Ne pas insérer le médiator de plus de 5 mm.

Continuez à séparer l'adhésif du bord gauche jusqu'à ce que vous atteigniez la prochaine section renfoncée du châssis.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.