Ga door naar hoofdinhoud

Procedimiento de apertura (Primer y segunda generación)

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.

Stap 20
Opening Procedure (1st and 2nd Gen): stap 0, afbeelding 1 van 2 Opening Procedure (1st and 2nd Gen): stap 0, afbeelding 2 van 2
  • Lower the opening pick so it is horizontal to the screen.

  • Don't insert the pick more than 5 mm.

  • Continue separating the left edge adhesive until you reach the next indented section of the frame.

Baja la púa de apertura para que este horizontalmente con la pantalla.

No insertes la púa mas de 5 mm.

Continua separando el adhesivo del borde izquierdo hasta que alcances la siguiente sección con muesca del marco.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.