Ga door naar hoofdinhoud

Procedimento di Apertura (1° e 2° generazione)

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.

Stap 9
Opening Procedure (1st and 2nd Gen), Top edge information: stap 0, afbeelding 1 van 3 Opening Procedure (1st and 2nd Gen), Top edge information: stap 0, afbeelding 2 van 3 Opening Procedure (1st and 2nd Gen), Top edge information: stap 0, afbeelding 3 van 3
Top edge information
  • The top edge of the iPad contains the camera module, two ambient light sensors, the proximity sensor, and front microphone. These components are fragile and easily damaged if an opening pick is inserted too far. Only separate the adhesive in the marked locations to avoid damage.

  • The two ambient light sensors can be hard to see and can be located using a flashlight or by placing the iPad under a bright light.

  • Don't insert an opening pick more than 2 mm near the top left and right edges or you'll damage the ambient light sensors.

  • Don't insert an opening pick more than 1 mm near the middle of the top edge or you'll damage the camera module, proximity sensor, and front microphone.

Il bordo superiore dell'iPad contiene il modulo della fotocamera, due sensori di luce ambientale, il sensore di prossimità e il microfono frontale. Questi componenti sono fragili e si danneggiano facilmente se un plettro di apertura viene inserito troppo in profondità. Separa l'adesivo solo nelle zone evidenziate per evitare danni.

I due sensori di luce ambientale possono essere difficili da vedere e possono essere trovati utilizzando una torcia o posizionando l'iPad sotto una luce intensa.

Non inserire un plettro di apertura più di 2 mm vicino ai bordi in alto a sinistra e a destra o danneggerai i sensori di luce ambientale.

Non inserire un plettro di apertura più di 1 mm vicino al centro del bordo superiore o danneggerai il modulo della fotocamera, il sensore di prossimità e il microfono anteriore.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.