Ga door naar hoofdinhoud

マザーボード

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 11 handleidingen die deze stap bevatten.

Stap 8
Motherboard Removal: stap 0, afbeelding 1 van 2 Motherboard Removal: stap 0, afbeelding 2 van 2
  • Grip the left trigger assembly cable with a pair of tweezers or your fingers to disconnect it from the trigger assembly.

  • Use the pull tab to disconnect the cable. Don't pull on the cable itself.

  • Depending on your model controller, the ribbon cable may block the motherboard from coming loose. If so, remove the cable from the trigger assembly.

ピンセットまたは指で左側のトリガーアセンブリーケーブルを握り、トリガーアセンブリーから外します。

プルタブを使ってケーブルを外します。ケーブル自体を引っ張らないでください。

リボンケーブルを外します。

[* black] Grip the left trigger assembly cable with a pair of tweezers or your fingers to disconnect it from the trigger assembly.
[* icon_caution] Use the pull tab to disconnect the cable. Don't pull on the cable itself.
-[* black] Remove the ribbon cable.
+[* icon_note] Depending on your model controller, the ribbon cable may block the motherboard from coming loose. If so, remove the cable from the trigger assembly.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.