Ga door naar hoofdinhoud

Sostituzione vetro posteriore iPhone 14 Plus

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Stap 18
iPhone 14 Plus Rear Glass Replacement, Disconnect the battery: stap 0, afbeelding 1 van 2 iPhone 14 Plus Rear Glass Replacement, Disconnect the battery: stap 0, afbeelding 2 van 2
Disconnect the battery
  • Use the pointed end of a spudger to disconnect the battery cable by prying the connector straight up from its socket.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

Usa la punta di uno spudger per scollegare il cavo della batteria sollevando il connettore direttamente dalla sua presa.

Cerca di non danneggiare la guarnizione nera in silicone che circonda questa e altre connessioni sulla scheda. Queste guarnizioni forniscono una protezione ulteriore contro l'ingresso di acqua e polvere.

Piega leggermente il connettore per allontanarlo dalla scheda logica per evitare che faccia involontariamente contatto con la presa e fornisca energia al telefono durante la riparazione.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.