Ga door naar hoofdinhoud

iPhone 14 Plus 后壳替换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Stap 16
iPhone 14 Plus Rear Glass Replacement, Unfasten the battery connector cover screws: stap 0, afbeelding 1 van 1
Unfasten the battery connector cover screws
  • Use a Y000 screwdriver to remove the two 1.3 mm-long screws securing the battery connector cover.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

  • During reassembly, this is a good point to power on your iPhone and test all functions before you seal the display in place. Be sure to power your iPhone back down completely before you continue working.

使用 Y000 螺丝刀卸下固定电池接口盖的两颗 1.3 毫米长的螺丝。

在整个维修过程中,请保管好每一个螺丝 ,并确保它们从哪里来到哪里去,以免损伤你的设备。

在重新组装过程中,这是在将显示屏密封到位之前打开 iPhone 并测试所有功能的最好时机。 在继续维修之前,请务必将 iPhone 完全断电。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.