Ga door naar hoofdinhoud

Reemplazo del cristal trasero iPhone 14 Plus

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Stap 6
iPhone 14 Plus Rear Glass Replacement, Insert an opening pick: stap 0, afbeelding 1 van 3 iPhone 14 Plus Rear Glass Replacement, Insert an opening pick: stap 0, afbeelding 2 van 3 iPhone 14 Plus Rear Glass Replacement, Insert an opening pick: stap 0, afbeelding 3 van 3
Insert an opening pick
  • Apply a suction handle to the bottom edge of the rear glass, while avoiding the very edge of the glass.

  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the rear glass and the frame.

  • Insert an opening pick into the gap.

  • The adhesive holding the rear glass in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the rear glass up and down to weaken the adhesive until you create enough of a gap to insert your opening pick.

Aplica una ventosa en el borde inferior del cristal trasero, evitando el borde mismo del cristal.

Tira hacia arriba de la ventosa con una presión firme y constante para crear un pequeño espacio entre el vidrio trasero y la caja.

Inserta una púa de apertura en el espacio.

El adhesivo que sujeta el vidrio trasero en su lugar es muy fuerte; crear este espacio inicial requiere una cantidad significativa de fuerza.

Si tienes dificultades para abrir un espacio, aplica más calor y mueve suavemente el vidrio trasero hacia arriba y hacia abajo para debilitar el adhesivo hasta que crees un espacio suficiente para insertar tu púa de apertura.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.