Replacing a ZIF Connector Locking Flap

Stap 1 — Align the Locking Flap in the Correct Position

A Locking flap with the markings "DDF" and "30d" visible on the top is shown in the first photo. It is positioned in the right direction to be replaced.

Stap 2 — Insert One Side of the Locking Flap

Lift the back of the locking flap to position it vertical to the ZIF connector.

Stap 3 — Progressive Insertion of the Locking Flap

Gradually insert the flap from right to left.

Stap 4 — Insert the Left Side

Finish by inserting the left side in the same way as the right side.

Stap 5 — Functional Check

Verify that the flap pivots correctly without coming off its axis.