Ga door naar hoofdinhoud

Reemplazo de la batería del Apple Watch Serie 7

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 9
Apple Watch Series 7 Battery Replacement, Pry up the battery: stap 0, afbeelding 1 van 3 Apple Watch Series 7 Battery Replacement, Pry up the battery: stap 0, afbeelding 2 van 3 Apple Watch Series 7 Battery Replacement, Pry up the battery: stap 0, afbeelding 3 van 3
Pry up the battery
  • The following six steps show how to remove the battery from a 45 mm Apple Watch Series 7.

  • Insert an opening pick between watch body and the long edge of the battery.

  • Use constant, steady pressure to slowly pry up the battery.

  • Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a fire.

  • Don't try to remove the battery all the way yet. It is still connected to the motherboard.

Los siguientes seis pasos muestran cómo quitar la batería de un Apple Watch Series 7 de 45 mm.

Inserta una púa de apertura entre el cuerpo del reloj y el borde largo de la batería.

Usa una presión constante, firme para levantar lentamente la batería.

Ten cuidado de no perforar ni doblar la batería con tu herramienta; una batería perforada o doblada puede derramar sustancias químicas peligrosas o provocar un incendio.

No intentes quitar la batería por completo todavía. Todavía está conectada a la placa base.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.