Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 46 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
To ensure that everything is de-energized and won't turn on while you're working, it is recommended that you disconnect the battery. Grab the clear plastic pull tab attached to the battery connector and pull it parallel to the board toward the front edge of the Air.
  • To ensure that everything is de-energized and won't turn on while you're working, it is recommended that you disconnect the battery.

  • Grab the clear plastic pull tab attached to the battery connector and pull it parallel to the board toward the front edge of the Air.

  • Do not lift upward on the connector as you disconnect it or you risk damage to the connector socket.

Per assicurarti che nulla sia alimentato e non si possa accendere mentre stai lavorando, è raccomandato scollegare la batteria.

Afferra la piccola striscia di plastica trasparente attaccata al connettore della batteria e tirala parallelamente alla scheda verso il bordo anteriore dell'Air.

Non sollevare il connettore per disconnetterlo in quanto potresti danneggiarne l'alloggiamento.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.