Ga door naar hoofdinhoud

MacBook Pro 14" 2021 배터리 커넥터 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 25 handleidingen die deze stap bevatten.

Stap 6
MacBook Pro 14" 2021 Battery Connector Replacement, Disconnect the trackpad cable: stap 0, afbeelding 1 van 2 MacBook Pro 14" 2021 Battery Connector Replacement, Disconnect the trackpad cable: stap 0, afbeelding 2 van 2
Disconnect the trackpad cable
  • Use the flat end of a spudger to pry up and disconnect the trackpad cable's press connector secured to the logic board.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Spudger/스퍼저의 평평한 끝을 사용하여 로직 보드에서 트랙패드 케이블 프레스 커넥터를 들어 올려서 분리하세요.

이런 프레스 커넥터를 다시 부착하려면 딸깍 소리가 날 때까지 한쪽을 조심히 정렬하여 아래로 누른 다음 다른 쪽에도 반복하세요. 중앙은 누르지 마세요. 커넥터가 잘못 정렬되면 핀이 구부러져서 영구 손상을 입을 수 있습니다.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.