Ga door naar hoofdinhoud

Sostituzione connettore batteria MacBook Pro 14" 2021

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 25 handleidingen die deze stap bevatten.

Stap 6
MacBook Pro 14" 2021 Battery Connector Replacement, Disconnect the trackpad cable: stap 0, afbeelding 1 van 2 MacBook Pro 14" 2021 Battery Connector Replacement, Disconnect the trackpad cable: stap 0, afbeelding 2 van 2
Disconnect the trackpad cable
  • Use the flat end of a spudger to pry up and disconnect the trackpad cable's press connector secured to the logic board.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Usa l'estremità piatta di uno spudger per sollevare e scollegare il connettore a pressione del cavo del trackpad fissato alla scheda logica.

Per ricollegare i connettori a pressione come questo, allinea attentamente e premi su un lato finché non scatta in posizione, quindi ripeti sull'altro lato. Non premere al centro. Se il connettore è disallineato, i pin possono piegarsi, causando danni permanenti.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.