MacBook Pro 14" 2021 MagSafe Port Replacement

Engels

Nederlands

Stap 1 vertalen

Stap 1

Unfasten the MagSafe port

Use a 2IP Torx Plus driver to loosen (don't remove) the two MagSafe Port set screws a few turns above the frame.
In a pinch, you can use a standard T2 Torx driver to loosen these screws. Make sure to apply constant, downward force to prevent stripping.
Use your T5 Torx driver to remove the two 2.7 mm-long screws securing the MagSafe port.
These screws are not magnetic—be careful not to lose them.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.