Ga door naar hoofdinhoud

MacBook Core 2 Duo C-Channel Replacement

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 13 handleidingen die deze stap bevatten.

Engels
Nederlands

Stap 1 vertalen

Stap 1
MacBook Core 2 Duo C-Channel Replacement: stap 0, afbeelding 1 van 1
  • For original Macbook Core Duo and Core 2 Duo models, remove these 3 screws:

  • Two 3 mm Phillips near the right speaker.

  • One 6 mm Phillips threaded through a hole in a plastic finger above the subwoofer.

  • When reinstalling the screw above the subwoofer, be careful not to over-tighten it or the subwoofer's plastic could crack.

  • For Santa Rosa/Penryn and 2009 models, which don't have a c-channel:

  • Remove only the single 3 mm Phillips screw from the right speaker, and skip step 26.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.