Ga door naar hoofdinhoud

MacBook Core 2 Duo Optical Drive Replacement

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 22 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 8
MacBook Core 2 Duo Optical Drive Replacement: stap 0, afbeelding 1 van 1
  • Remove the 2 mm Phillips #00 screw securing the rear corner of the optical drive.

  • When reinstalling this screw, make sure none of the cables nearby get caught under the screw's head.

  • The silver-jacketed Bluetooth cable may be covering the screw. If so, carefully push it aside. You may need to remove the screw holding the ground shield lugs for the two nearby cables before you can move the Bluetooth cable aside sufficiently. This screw is 7mm in earlier models, and may be 4.2mm in Santa Rosa/Penryn and 2009 models.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.