Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 7 handleidingen die deze stap bevatten.
Stap 1 vertalen
Stap 1
-
Use a Phillips #1 screwdriver to remove the five 5 mm screws that secure the base panel.
-
Wedge a spudger between the base panel and chassis, and pry around the entire perimeter until you hear a pop and the base panel releases.
-
Lift the base panel up and off of the chassis.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.