Ga door naar hoofdinhoud

Samsung Galaxy S21 Ultra 스크린 교체

Engels
Koreaans

Handleidingsinformatie

= Klaar = Onvolledig
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      ***To reassemble your device, follow these instructions in reverse order.***
      After you've completed the repair, ++[guide|152254|follow this guide|new_window=true]++ to test your repair.
      The best way to secure the new screen is to apply a sheet of custom-cut double-sided tape to the back of the screen.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Samsung%20Galaxy%20S21%20Ultra|Answers community] for help.

      Stappen

      Stap 1 — 디스플레이 접착제 풀기

      가열한 iOpener를 스크린에 적용하면 아랫면의 접착제가 느슨해집니다. iOpener를 최소한 5분 동안 적용하세요.

      Stap 2 — 여는 픽 끼우기

      스크린을 만졌을 때 따뜻하면 흡입 손잡이를 스크린 왼편 가장자리에 최대한 가까이 대세요.

      Stap 3 — 접착제 자르기

      왼편 상단 모서리에 두 번째 여는 픽을 끼우고 스크린 왼편 하단 모서리로 밀어서 접착제를 자르세요.

      Stap 4

      전면 카메라 근처에서 자를 때, 카메라를 손상하거나 문지르지 않도록 여는 픽의 끝 부분만 (~ 2-3mm) 끼우세요.

      Stap 5

      접착제를 자르기 어려워지면, 접착제가 식었을 가능성이 큽니다. 열선총 또는 iOpener를 사용하여 1-2분 동안 재가열하세요.

      Stap 6

      스크린 오른편 하단 모서리에 다섯 번째 여는 픽을 끼우세요.

      Stap 7 — 지문 케이블 분리하기

      지문 플렉스 케이블을 중앙프레임의 틈으로 통과시키세요.

      Stap 8 — 스크린 분리하기

      디스플레이 플렉스 케이블을 중앙프레임의 틈으로 통과시키고 스크린을 분리하세요.

      Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.