Repareer je spullen Gemeenschap Winkel

Samsung Galaxy Watch4 Classic Display Replacement

Terug naar de handleiding
Engels
Nederlands
Stap 4
Disconnect the sensor flex cable

  • Lay the watch face down.

  • Carefully swing open the back cover by folding it to the opposite site of the created gap.

  • Use the flat end of a spudger to pry up and disconnect the sensor flex cable from the motherboard.

  • Remove the back cover.

  • Make sure the rubber gasket is undamaged. If damaged, replace it with a new one during reassembly to maintain proper water resistance.

Vertaling hier toevoegen

wayt

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.