Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.
Stap 3 vertalen
Stap 3
-
Insert a pick into the gap to the left of the battery and slide its tip underneath the battery.
-
Slide the pick along the left side of the battery to slice through the adhesive securing it to the midframe.
-
Once the left side of the battery begins to separate from the midframe, leave an opening pick in the gap to keep the battery slightly raised.
-
Apply four to five drops of isopropyl alcohol directly to the adhesive securing the battery to the midframe.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.