Ga door naar hoofdinhoud

Procédure d'ouverture

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 19 handleidingen die deze stap bevatten.

Stap 14
Opening Procedure: stap 0, afbeelding 1 van 3 Opening Procedure: stap 0, afbeelding 2 van 3 Opening Procedure: stap 0, afbeelding 3 van 3
  • Once you cut the adhesive over the antennas (8.5 inches, or 22 cm, from the left edge), slide the pick the rest of the way along the top edge of the surface and round the top right corner to slice through any remaining adhesive.

Une fois que vous avez coupé l'adhésif au-dessus des antennes (à 22 cm, ou 8,5 pouces, du bord gauche), faites glisser le médiator jusqu'au bout, le long du bord supérieur et autour du coin supérieur droit, afin de couper tout l'adhésif qui reste.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.