Ga door naar hoofdinhoud

拆开机身

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 19 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
Opening Procedure, Tape the screen: stap 0, afbeelding 1 van 3 Opening Procedure, Tape the screen: stap 0, afbeelding 2 van 3 Opening Procedure, Tape the screen: stap 0, afbeelding 3 van 3
Tape the screen
  • If your screen glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.

  • Lay overlapping strips of clear packing tape over the Surface’s screen until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the screen.

  • Do your best to follow the rest of the guide as described. However, once the glass is broken, it will likely continue to crack as you work, and you may need to use a metal prying tool to scoop the glass out.

  • Wear safety glasses to protect your eyes, and be careful not to damage the LCD display.

如果你的屏幕玻璃破裂,请保持进一步的破损,并在维修过程中用胶带粘住玻璃以防止人身伤害。

将重叠的透明包装胶带条放在 Surface 的屏幕上,直到覆盖整个表面。

这将保持包含玻璃碎片并在撬起和抬起屏幕时提供结构完整性。

尽最大努力按照所述指南的其余部分进行操作。但是,一旦玻璃破碎,它可能会在你工作时继续破裂,你可能需要使用金属撬具将玻璃舀出。

戴上安全眼镜以保护你的眼睛,并注意不要损坏 LCD 显示屏。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.