Ga door naar hoofdinhoud

여는 절차

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 19 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
Opening Procedure, Tape the screen: stap 0, afbeelding 1 van 3 Opening Procedure, Tape the screen: stap 0, afbeelding 2 van 3 Opening Procedure, Tape the screen: stap 0, afbeelding 3 van 3
Tape the screen
  • If your screen glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.

  • Lay overlapping strips of clear packing tape over the Surface’s screen until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the screen.

  • Do your best to follow the rest of the guide as described. However, once the glass is broken, it will likely continue to crack as you work, and you may need to use a metal prying tool to scoop the glass out.

  • Wear safety glasses to protect your eyes, and be careful not to damage the LCD display.

스크린 유리에 금이 간 경우, 유리에 테이프를 붙여서 수리하는 동안 더 이상의 파손을 방지하고 신체 상해를 막으세요.

전체 화면을 덮을 때까지 Surface 스크린 위에 투명 포장 테이프를 붙여주세요.

이렇게 하면 유리 조각을 관리하며 스크린을 들어 올릴 때 구조를 유지할 수 있습니다.

나머지 안내서 내용을 최선을 다해 따르세요. 하지만, 일단 유리가 깨지면, 작업하는 동안 계속 금이 갈 수 있으며 금속 도구를 사용하여 깨진 유리를 퍼내야 할 수도 있습니다.

보안경을 착용하여 눈을 보호하고 LCD 디스플레이를 손상하지 않도록 주의하세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.