Ga door naar hoofdinhoud

Verwijderen van het EMI-schild van het moederbord

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 14 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 4
Motherboard EMI Shield Removal: stap 0, afbeelding 1 van 2 Motherboard EMI Shield Removal: stap 0, afbeelding 2 van 2
  • Be careful not to puncture or deform the battery with your opening tool.

  • Starting with the clips adjacent to the battery, use an opening tool to carefully pry the motherboard EMI shield straight up from underneath each arrow to disconnect the clips.

  • Take care to deform the EMI shield as little as possible. It will need to be reused.

Gebruik een openingstool om het EMI-schild van het moederbord bij elk pijltje in een rechte beweging omhoog te wrikken om deze uit de klemmen los te krijgen. Begin bij de klem het dichtst bij de batterij.

Ga voorzichtig te werk en probeer het EMI-schild zo min mogelijk te vervormen, aangezien je deze weer zult moeten installeren.

+[* icon_caution] Be careful not to puncture or deform the battery with your opening tool.
[* black] Starting with the clips adjacent to the battery, use an opening tool to carefully pry the motherboard EMI shield straight up from underneath each arrow to disconnect the clips.
[* icon_caution] Take care to deform the EMI shield as little as possible. It will need to be reused.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.