Repareer je spullen Gemeenschap Winkel

Microsoft Surface Laptop 3 15" 상단 케이스 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 23 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Koreaans
Stap 4
Microsoft Surface Laptop 3 15" Upper Case Replacement, Disconnect the ribbon cable: stap 0, afbeelding 1 van 3 Microsoft Surface Laptop 3 15" Upper Case Replacement, Disconnect the ribbon cable: stap 0, afbeelding 2 van 3 Microsoft Surface Laptop 3 15" Upper Case Replacement, Disconnect the ribbon cable: stap 0, afbeelding 3 van 3
Disconnect the ribbon cable

  • The keyboard and touchpad ribbon cable is secured in place by a magnet connector.

  • On some models, this connector is surrounded by black tape.

  • Insert the flat end of a spudger underneath one edge of the ribbon cable connector, and pry up to release it.

  • Remove the ribbon cable from the motherboard.

리본 케이블 분리하기

키보드와 터치패드 리본 케이블은 자석 커넥터로 제자리에 고정되어 있습니다.

일부 모델에서 이 커넥터는 검정색 테이프로 둘러싸여 있습니다.

리본 케이블 커넥터의 한쪽 가장자리 아랫면에 spudger/스퍼저의 평평한 끝을 끼우고 위로 들어 올려 분리하세요.

마더보드에서 리본 케이블을 분리하세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.