Repareer je spullen Gemeenschap Winkel

Microsoft Surface Laptop 3 15" 고무패킹 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 25 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Koreaans
Stap 2
Microsoft Surface Laptop 3 15" Feet Replacement, Removal tip: stap 0, afbeelding 1 van 2 Microsoft Surface Laptop 3 15" Feet Replacement, Removal tip: stap 0, afbeelding 2 van 2
Removal tip

  • The feet on the bottom of the laptop are meant to be removed with the pointed end of a spudger.

  • Each foot has a hidden indent that will simplify removal.

  • To make sure the spudger is in the indent, insert it at the nearest long edge, pushing parallel to the short edges of the laptop, as shown.

  • Note that the two feet near the rear (screen) edge are different than the two front feet.

분리 힌트

노트북 바닥의 고무패킹은 spudger/스퍼저의 뾰족한 끝으로 분리해야 합니다.

각 고무패킹에는 분리를 쉽게하는 숨겨진 홈이 있습니다.

Spudger/스퍼저가 홈에 있는지 확인하려면, 사진 처럼, 스퍼저를 노트북의 짧은 가장자리와 평행하게 밀면서 가장 가까운 긴 가장자리에 끼우세요.

후면 (스크린) 가장자리 근처의 고무패킹 두 개와 전면 고무패킹 두 개가 다름에 주목하세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.