Ga door naar hoofdinhoud

微软 Surface Pro 6 屏幕更换

Stap 4
Microsoft Surface Pro 6 Screen Replacement: stap 0, afbeelding 1 van 1
  • Remove the display board.

  • During reassembly, use a strong double-sided tape or a precut adhesive card to secure the display board. Clean off old adhesive before applying new adhesive.

  • To ensure correct positioning, plug in both display connectors before adhering the board to the display.

拆下显示板。

重新组装期间,请使用强力双面胶带或预切胶卡来固定显示板。在涂抹新粘合剂之前清除旧粘合剂。

为确保正确定位,请在将电路板粘附到显示器之前插入两个显示器接口。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.