Ga door naar hoofdinhoud

Microsoft Surface Pro 6 Openingsprocedure

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 13 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 12
Microsoft Surface Pro 6 Opening Procedure: stap 0, afbeelding 1 van 3 Microsoft Surface Pro 6 Opening Procedure: stap 0, afbeelding 2 van 3 Microsoft Surface Pro 6 Opening Procedure: stap 0, afbeelding 3 van 3
  • Insert the point of a pick under the display where you just stopped cutting. Do not insert the pick deeper than the edge of the bezel.

  • Carefully roll the pick to the right, pressing the long edge of the pick into the screen adhesive underneath the bezel, cutting the adhesive as you go. Do not slide the pick along the edge of the Surface.

  • Keep the pick parallel to the screen throughout the whole procedure so that it doesn't catch on the antennas. Do not press the pick against the case.

  • Repeat this motion of inserting the point of the pick where you just cut, and rolling to the right all along the top edge of the Surface, until the pick is 2.5 inches (64 mm) from the right edge of the Surface.

Steek de punt van je plectrum, op het punt waar je zojuist gestopt bent met schuiven, onder het scherm. Steek je plectrum niet verder dan de rand van het scherm.

Rol je plectrum op voorzichtige wijze naar rechts, waarbij je de lange zijde van je plectrum in de lijm onder de rand duwt en deze zo doorsnijdt. Schuif je plectrum absoluut niet langs de bovenkant van de Surface.

Houd je plectrum gedurende deze stappen constant parallel aan het scherm, zodat je plectrum niet achter (een van) de antennes blijft hangen. Druk je plectrum niet tegen de behuizing aan.

Herhaal deze beweging, waarbij je de punt van je plectrum in het toestel steekt en je plectrum naar rechts rolt, langs de gehele bovenkant van de Surface. Stop als je plectrum zich 6.4 centimeter (2.5 inches) van de rechterkant van de Surface bevindt.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.