Repareer je spullen Gemeenschap Winkel

Microsoft Surface Pro 6 Opening Procedure

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 13 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Koreaans
Stap 7
Microsoft Surface Pro 6 Opening Procedure: stap 0, afbeelding 1 van 3 Microsoft Surface Pro 6 Opening Procedure: stap 0, afbeelding 2 van 3 Microsoft Surface Pro 6 Opening Procedure: stap 0, afbeelding 3 van 3

  • Insert a new opening pick into the bottom right corner and slide it around the corner toward the bottom edge.

  • Don't insert the opening pick any deeper than the black bezel on the side of the screen. Inserting the pick too far may damage the LCD.

  • Slide the pick along the bottom edge of the Surface to cut through the screen adhesive.

  • Leave this pick in the bottom edge to prevent the adhesive from resealing.

새 여는 픽을 하단 오른편 모서리에 끼우고 하단 가장자리를 향해서 모서리를 따라 미세요

여는 픽을 스크린 측면의 검정색 베젤보다 깊게 끼우지 마세요. 픽을 너무 깊이 끼우면 LCD를 손상할 수 있습니다.

Surface 하단 가장자리를 따라 픽을 밀어서 스크린 접착제를 자르세요.

접착제가 다시 붙는 것을 방지하기 위해서 이 픽을 하단 가장자리에 그대로 두세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.