Position the extendable footrest bar to the front frame, at the desired height.

Line up the two bolt holes on the footrest bar with the two holes on the front frame.

Using the 10 mm wrench, secure the footrest bar to the front frame, using the a flat-head bolt and nut pointing in towards the center of the wheelchair.

Attach the footrest to the footrest bar, with the bottom of the footrest pointing upwards.

Match the footrest wedges up with the holes. Then attach the footrest to the front frame, using four small bolts. Next, tighten the four small nuts onto the bolts using the 10 mm wrench.