Ga door naar hoofdinhoud
Engels
Nederlands
Stap 3
Insert the corner of a plastic card between the lower end of the battery and the frame. Press the card until approximately an inch and a half of it is underneath the battery.
Insert a plastic card under the battery
  • Insert the corner of a plastic card between the lower end of the battery and the frame.

  • Press the card until approximately an inch and a half of it is underneath the battery.

  • Take care not to bend the battery—a bent battery may leak dangerous chemicals or cause a thermal event.

  • Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.