Ga door naar hoofdinhoud
Engels
Nederlands
Stap 6
Insert the flat end of a spudger into the groove in the speaker housing, near the corner of the rear case. Push the speaker away from the rear case. Push the speaker out from underneath the shelf on the rear case.
  • Insert the flat end of a spudger into the groove in the speaker housing, near the corner of the rear case.

  • Push the speaker away from the rear case.

  • Push the speaker out from underneath the shelf on the rear case.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.