Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
Remove 3 Phillips screws from the bottom of the power supply.  These hold together the upper and lower halves of the plastic power supply case. Remove 3 Phillips screws from the bottom of the power supply.  These hold together the upper and lower halves of the plastic power supply case.
Remove 3 Bottom Screws
  • Remove 3 Phillips screws from the bottom of the power supply. These hold together the upper and lower halves of the plastic power supply case.

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.