Ga door naar hoofdinhoud

Xbox Series X ファンの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 31 handleidingen die deze stap bevatten.

Stap 2
Xbox Series X Fan Replacement, Disconnect the fan cable: stap 0, afbeelding 1 van 3 Xbox Series X Fan Replacement, Disconnect the fan cable: stap 0, afbeelding 2 van 3 Xbox Series X Fan Replacement, Disconnect the fan cable: stap 0, afbeelding 3 van 3
Disconnect the fan cable
  • Use your fingers or a pair of blunt tweezers to grip the edges of the fan cable connector, and pull up to disconnect it from the center chassis.

  • Always pull cables by their connectors and not the wires themselves.

  • During reassembly, route the fan cable underneath its small cable guide on the fan housing so it doesn't interfere with the back panel.

先端が鋭利でないピンセットを使って、ファンケーブルコネクタの端を摘みます。そして中央部分のカシスから接続を外します。

ケーブルを外す時は、常にワイヤ自体ではなく、コネクタを引っ張ってください。

再組み立ての際には、ファンケーブルをファンハウジングの小さなケーブルガイドの下に通し、バックパネルに干渉しないようにします。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.