Ga door naar hoofdinhoud

Comment retirer boîtier arrière PlayStation 5

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap 4 vertalen

Stap 4
How to Remove the Rear Case on a PlayStation 5, Remove the case: stap 0, afbeelding 1 van 3 How to Remove the Rear Case on a PlayStation 5, Remove the case: stap 0, afbeelding 2 van 3 How to Remove the Rear Case on a PlayStation 5, Remove the case: stap 0, afbeelding 3 van 3
Remove the case
  • Lift the front edge of the case off of the motherboard and heat sink assembly.

  • With the front edge elevated, push the case back, away from the motherboard and heat sink assembly, to maneuver the charging port out of its slot in the case.

  • Remove the case.

  • The front plate may come apart from the plastic case. During reassembly, make sure the front plate is in place before reinserting the motherboard and power supply.

Soulevez le bord avant du boîtier pour l'éloigner de l'ensemble carte mère-dissipateur thermique.

Alors que le bord est soulevé, repoussez le boîtier vers l'arrière, de sorte à l'éloigner de l'ensemble carte mère-disspiateur thermique, pour faire sortir le port de charge de sa fente dans le boîtier.

Retirez le boîtier.

[title] Remove the case
[* black] Lift the front edge of the case off of the motherboard and heat sink assembly.
[* black] With the front edge elevated, push the case back, away from the motherboard and heat sink assembly, to maneuver the charging port out of its slot in the case.
[* black] Remove the case.
+[* icon_reminder] The front plate may come apart from the plastic case. During reassembly, make sure the front plate is in place before reinserting the motherboard and power supply.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.