Ga door naar hoofdinhoud

PlayStation 5 Gehäuserückseite entfernen

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap 4 vertalen

Stap 4
How to Remove the Rear Case on a PlayStation 5, Remove the case: stap 0, afbeelding 1 van 3 How to Remove the Rear Case on a PlayStation 5, Remove the case: stap 0, afbeelding 2 van 3 How to Remove the Rear Case on a PlayStation 5, Remove the case: stap 0, afbeelding 3 van 3
Remove the case
  • Lift the front edge of the case off of the motherboard and heat sink assembly.

  • With the front edge elevated, push the case back, away from the motherboard and heat sink assembly, to maneuver the charging port out of its slot in the case.

  • Remove the case.

  • The front plate may come apart from the plastic case. During reassembly, make sure the front plate is in place before reinserting the motherboard and power supply.

Hebe die Vorderkante des Gehäuses von der Hauptplatine und dem Kühlkörper ab.

Lasse die Vorderkante angehoben und drücke das Gehäuse von der Hauptplatine und dem Kühlkörper nach hinten, so dass die Ladebuchse aus ihrer Öffnung im Gehäuse herauskommt.

Entferne das Gehäuse.

Es kann sein, dass sich die Frontplatte vom Kunststoffgehäuse löst. Achte beim Zusammenbau darauf, dass die Frontplatte eingebaut ist, bevor du die Hauptplatine und das Netzteil montierst.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.