Ga door naar hoofdinhoud
Engels
Nederlands

Stap 16 vertalen

Stap 16
Set the optical drive assembly into the optical drive bay. There are two screws that line up onto a track in the bottom of the bay.
  • Set the optical drive assembly into the optical drive bay. There are two screws that line up onto a track in the bottom of the bay.

  • Warning: Carefully route the cabling so that it is not pinched or disconnected when fitting the carrier into the optical bay.

  • Fully insert so the drive assembly is flush with the bay.

  • New optical drive is installed. Reassemble Mac Pro.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.