Ga door naar hoofdinhoud
Engels
Nederlands
Stap 11
Start routing the SATA cable that you have already attached to the logic board up through the corner of the optical bay, following the existing wires. Make sure you have the cable all the way tucked in behind the connector before proceeding. See the first graphic as an example.
  • Start routing the SATA cable that you have already attached to the logic board up through the corner of the optical bay, following the existing wires.

  • Make sure you have the cable all the way tucked in behind the connector before proceeding. See the first graphic as an example.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.