Ga door naar hoofdinhoud
Engels
Nederlands

Stap 1 vertalen

Stap 1
Remove thirteen 2.7mm screws  holding the rear camera housing plate with a T5 Torx screwdriver. Use the opening pick or spudger to lift the plate from the motherboard. Use the opening pick or spudger to lift the plate from the motherboard.
  • Remove thirteen 2.7mm screws holding the rear camera housing plate with a T5 Torx screwdriver.

  • Use the opening pick or spudger to lift the plate from the motherboard.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.