Repareer je spullen Gemeenschap Winkel

iPhone 12 Pro听筒扬声器和前传感器组件更换

Engels
Chinees

Handleidingsbenodigdheden

Alle vooraf vereiste handleidingen moeten vertaald worden voordat deze vertaling volledig wordt beschouwd.

iPhone 12 Pro 五角螺丝更换

三角撬片深度标记

iPhone 12 Pro 显示屏总成更换

Handleidingsinformatie

= Klaar = Onvolledig
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''***To reassemble your device, follow the above steps in reverse order.'''***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2012%20Pro|iPhone 12 Pro Answers community] for help.

      Stappen

      Stap 1 — 拧开扬声器/传感器

      拧下将扬声器/传感器组件固定到显示器背面的四颗螺丝。

      Stap 2 — 翻转扬声器组件

      耳机扬声器已轻轻固定在适当的位置。

      Stap 3 — 加热显示屏的上边缘

      使用吹风机或热风枪或准备一个 iOpener 并将其涂在显示屏的顶部正面1-2分钟，以软化固定传感器的粘合剂。

      Stap 4 — 分离环境光传感器

      用撬棒的尖端提起环境光传感器并将其从前面板的槽口中分离出来。

      Stap 5 — 撬起麦克风

      使用撬棒的尖端提起麦克风并将其与前面板的缺口分开。

      Stap 6 — 撬起接近传感器和泛光照明器模块

      用撬棒的尖端将接近传感器和泛光照明器模块从前面板的槽口中提出。

      Stap 7 — 卸下扬声器和前传感器组件

      卸下听筒扬声器和前传感器组件。

      Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.