Repareer je spullen Gemeenschap Winkel

iPhone 12 디스플레이 어셈블리 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 9 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Koreaans
Stap 20
iPhone 12 Display Assembly Replacement, Disconnect the digitizer cable: stap 0, afbeelding 1 van 2 iPhone 12 Display Assembly Replacement, Disconnect the digitizer cable: stap 0, afbeelding 2 van 2
Disconnect the digitizer cable

  • Use a spudger or a fingernail to disconnect the digitizer cable connector.

  • If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.

디지타이저 케이블 분리하기

Spudger 또는 손톱을 사용하여 디지타이저 케이블 커넥터를 분리하세요.

수리를 마친 후 스크린에 터치 반응이 없는 부분이 생긴 경우 배터리를 분리한 다음 이 커넥터를 다시 제대로 들어맞게 장착하고 소켓에 먼지 또는 기타 장애물이 없음을 확인하세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.