Ga door naar hoofdinhoud

iPhone 12 mini 电池更换

Engels
Chinees

Handleidingsbenodigdheden

Alle vooraf vereiste handleidingen moeten vertaald worden voordat deze vertaling volledig wordt beschouwd.

iPhone 12 mini 五角螺丝更换

三角撬片深度标记

iPhone 12 mini 打开步骤

iPhone 12 mini 显示屏总成更换

iPhone 12 mini 底部扬声器更换

Handleidingsinformatie

= Klaar = Onvolledig
    iPhone batteries are rated to hold 80% of their capacity for up to 500 charge cycles, which lasts roughly 18-24 months for most users. After that, your iPhone may need to be charged far more frequently, and iOS may warn you that performance is affected (in other words, your phone will run slower). Use this guide to replace your battery and restore your iPhone to like-new performance.
    If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].
    '''***Note'''***: After the repairOn iOS 17.6 and earlier, your iPhone may display a warning about the “genuineness” of the battery after the repair, even when using original Apple parts. If your iPhone functions normally, you can safely ignore the warning. On iOS 18 and newer, authenticate your new battery using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true].
    You’ll need replacement adhesive to reattach components when reassembling the device.
      If possible, turn on your device and test your repair before installing new adhesive and resealing.
      [guide|113604|Secure the new battery with pre-cut adhesive|new_window=true] or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the device at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place.
      ***To reassemble your device, follow the above steps in reverse order.*** Apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%).
      After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|calibrate it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings ***→*** General ***→***About ***→*** Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
      For optimal performance, after completing this guide, [[Battery Calibration|calibrate|new_window=true]] your newly installed battery.
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2012%20mini|iPhone 12 mini Answers community] for help.

      Stappen

      Stap 1 — 移除胶带

      剥下第一个电池粘合剂小拉条,使其脱离电池底部边缘。

      Stap 2

      用手指抓住拉环,然后将其从电池中缓慢拉出,朝iPhone的底部移动。

      Stap 3

      用手指抓住较宽的拉环,然后将其从电池中缓慢拉出,朝 iPhone 的底部移动。

      Stap 4

      用手指抓住拉环,然后将其从电池中缓慢拉出,朝iPhone的底部移动。

      Stap 5 — 移除电池

      取出电池。

      Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.