Ga door naar hoofdinhoud

iPhone 12 mini 배터리 교체

Stap 4
iPhone 12 mini Battery Replacement: stap 0, afbeelding 1 van 3 iPhone 12 mini Battery Replacement: stap 0, afbeelding 2 van 3 iPhone 12 mini Battery Replacement: stap 0, afbeelding 3 van 3
  • Grab the pull tab with your fingers and slowly pull it away from the battery, toward the bottom of the iPhone.

  • Repeat the previous procedure on the two remaining pull tabs.

  • If the adhesive breaks off underneath the battery and can't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).

  • Wait about one minute for the alcohol solution to weaken the adhesive.

  • Use the flat end of a spudger to gently lift the battery.

  • Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

당김 탭을 손가락으로 잡고 배터리에서 멀리, iPhone 하단을 향해 천천히 당기세요.

나머지 당김 탭 두 개에 이전 절차를 반복하세요.

접착 스트립이 배터리 아랫면에서 끊어져 회수하지 못하면, 배터리 가장자리 아랫면 접착 스트립(들)이 끊어진 자리에 고농도 (90% 이상) 이소프로필 알코올 몇 방울을 바르세요.

알코올 용액이 접착제를 약하게 할 때까지 1분 정도 기다리세요.

Spudger/스퍼저의 평평한 끝을 사용하여 배터리를 조심히 들어 올리세요.

배터리를 억지로 들어 올리지 마세요. 필요한 경우, 알코올 몇 방울을 더 발라서 접착제를 더 약하게 하세요. 비집는 도구로 배터리를 변형하거나 구멍 내지 마세요.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.